100 kW class
QR-GT100
Stationary 100 kW class generator set for natural gas. Electrical efficiency is 29%, with NOx at or below 25 ppmv. Exhaust heat can be recovered as hot water at 60 °C and 228 L/min. The enclosure is IP44. The generator inside is asynchronous, 400 V, with 50/60 Hz selectable.
- Rated output
- 100 kW
- Electrical efficiency
- 29%
- NOxppmv
- ≤25 ppm
- Hot water recovery60 °C
- 228 L/min
Specifications
Turbine unit
- Rated power
- 100 kW
- Rated efficiency
- 29%
- Compression ratio
- 4
- Turbine inlet temperature
- 900 °C
- Exhaust temperature
- 280 °C
- Exhaust flow
- 1.03 kg/s
- Shaft speed
- 68,000 rpm
- Fuel
- Natural gas
- Fuel consumption
- 35 Nm³/h @ LHV 8,500 kcal
- Gas supply pressure
- 0.55–0.7 MPa
- Gas temperature
- ≥5 °C and ≥10 °C above dew point, ≤85 °C
- Gas filtration
- ≤10 µm
- Dimensions (L × W × H)
- 3 × 0.85 × 2.25 m
- Weight
- ≤2.2 t
- Low-emission load
- ≥50%
- Minimum load
- 20 kW (29 Nm³/h)
- Heat recovery
- Hot water, 60 °C, 228 L/min
Structure
- Combustor
- Annular
- Compressor
- Centrifugal
- Shaft
- Single shaft
- Turbine
- Radial-inflow
Environmental
- NOx
- ≤25 ppmv
- Noise
- ≤75 dB(A) @ 1 m
- Enclosure
- IP44
Generator
- Type
- Asynchronous
- Voltage
- 400 V
- Frequency
- 50/60 HzSelectable
- Insulation class
- H
- Explosion protection
- Non-explosion-proof — installed inside the enclosure
- Protection
- IP23
Ask about the QR-GT100.
Share the site, the load and the fuel. We reply with a configuration and a quotation.